אחד לינוקס - MULTI USER SEATS IN EHAD 2006 taxi4u - 07/10/2006 - 22:13 נושא ההודעה: MULTI USER SEATS IN EHAD 2006
אני משתמש בהפצת אחד 2006 של דוביקס ואני מאד מאד מאד מאד מרוצה
בדר"כ הכל עובד חלק
בעבר השתמשתי בגרסת ה2006 הרגילה והיו שם הרבה בעיות
אך גרסת הקלסיק 2006 היא לדידי הגרסה הכי ידידותית וקלה להבנה ולהפעלה
ומאחר ויש לי צורך בשימוש ביותר מעמדה אחת התקנתי במחשב 2 כרטיסי מסך נוספים לכרטיס מסך \
שעל הלוח שגם הוא עם שתי יציאות VGA +DVI
יצרתי לי שלושה יוזרים כל אחד עם סיסמא
ופתחתי את המדריך המפורט של bob smith
Build a Six-headed, Six-user Linux System
להלן סדר הפעולות שנקטתי
1וידאתי קודם כל שאחד 2006 זיהה את שלשת כרטיסי המסך שהתקנתי
ובבדיקה במרכז הבקרה > חומרה אכן מופיעים שם כרטיס המסך שעל הלוח מסוג SIS 651 \
DUAL HEADS
ןשני כרטיסי מסך נוספים מסוג ATI RAGE128
כמו כן התקנתי 3 עכברים ושלושה מקלדות
עכבר ומקלדת ראשיים דרך PS/2
והשאר דרך יציאות USB שונות בעזרת USB TO PS/2 ADAPTER
על מנת למצוא איפה כולם מותקנים הרצתי פקודת lspci | grep VGA
וקבלתי את המיקומים הבאים לגבי כרטיסי המסך :
lspci | grep VGA
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage 128 RK/VR
00:13.0 VGA compatible controller: ATI Technologies Inc Rage 128 RK/VR
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter
לפי מיטב הבנתי כרטיס המסך הראשי שהינו SIS הותקן ב 01:00.0
כרטיס מס 1 ATI RAGE 128 מותקן ב 00:13.0
וכרטיס מס 2 ATI RAGE 128 מותקן ב 00:14.0 אם אני מתרגם נכון את e
שמרתי את הפלט הבא והמשכתי לשלב הבא
שלב העכברים הרצתי פקודה
ls /dev/input/mouse*
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
למעשה הבנתי שכאן הסדר לא כל כך משנה
אבל בכל זאת שמרתי את הפלט
עכבר ps/2 נמצא בכניסה 0
עכבר usb ראשון בכניסה 1
עכבר usb שני בכניסה 2
המשכתי הלאה למקלדות בהרצת פקודה
more /proc/bus/input/devices
וקיבלתי את הפלט הבא
אני הבנתי שיש לערוך את ה xorg.conf לפי הפרמטרים הבאים
עמדה ראשונה מוגדרת על פי הנתונים הבאים
seat or server layout 0 runs on the main SIS CARD at 01:00.0 address along with the keyboard of EVENT 0 & MOUSE 0
עמדה שניה
SEAT OR SERVER LAYOUT 1 runs on one of the twoi ATI VGA CARDS at 00:13.0 address
along with the keyboard of EVENT 2 & MOUSE 1
עמדה שלישית
SEAT OR SERVER LAYOUT 2 runs on the 2nd ATI VGA CARD at 00:0e address
along with the keyboard of EVENT 3 & MOUSE 2
אני מקווה שעד לכאן הבנתי נכון
אני מצרף בנקודה זאת העתק של ה XORG.CONF לפני שאני ניגש לערוך אותו
File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
[servers]
# These are the standard servers. You can add as many you want here
# and they will always be started. Each line must start with a unique
# number and that will be the display number of that server. Usually just
# the 0 server is used.
0=Standard
1=Standard
2=Standard
#1=Standard
# Note the VTAllocation and FirstVT keys on linux and freebsd.
# Don't add any vt<number> arguments if VTAllocation is on, and set FirstVT to
# be the first vt available that your gettys don't grab (gettys are usually
# dumb and grab even a vt that has already been taken). Using 7 will work
# pretty much for all linux distributions. VTAllocation is not currently
# implemented on anything but linux and freebsd. Feel free to send patches.
# X servers will just not get any extra arguments then.
#
# If you want to run an X terminal you could add an X server such as this
#0=Terminal -query serverhostname
# or for a chooser (optionally serverhostname could be localhost)
#0=Terminal -indirect serverhostname
#
# If you wish to run the XDMCP chooser on the local display use the following
# line
#0=Chooser
## Note:
# is your X server not listening to TCP requests? Perhaps you should look
# at the security/DisallowTCP setting!
# Definition of the standard X server.
[server-Standard0]
name=Standard server
command=/usr/X11R6/bin/X -nolisten tcp -novtswitch -sharevts -layout seat0
flexible=true
[server-Standard1]
name=Standard server
command=/usr/X11R6/bin/X -nolisten tcp -novtswitch -sharevts -layout seat1
flexible=true
[server-Standard2]
name=Standard server
command=/usr/X11R6/bin/X -nolisten tcp -novtswitch -sharevts -layout seat2
flexible=true
נקווה לטוב
taxi4u - 08/10/2006 - 01:14 נושא ההודעה: 3 problems to solve bad file descriptor
אחרי שערכתי את ה xorg.conf
ואתחלתי את המחשב אני מקבל את ההודעות הבאות
PRASE ERROR ON LINE 248 OF SECTION SCREEN IN FILE XORG.CONF
SUBSECTION IS NO VALID KEYWORD IN THIS SECTION
(EE) PROBLEM PARSING THE CONFIG FILE
FATAL ERROR SERVER
NO SCREENS FOUND
WW XF86loseconsole VT GETSTATE Failed Bad File Descriptor
WW XF86 loseconsole KDSETMODE Failed Bad File Descriptor
VT GETMODE Failed
Bad File Descriptor
ניסיתי לשנות ולתקן את השורה אך ללא הצלחה אולי מישהו יכול לעזור
מה שאני בכל זאת יכול לעשות אני פשוט שמרתי את קובץ הxorg.conf האורגינלי ואני מחזיר אותו כדי להמשיך להשתמש במחשב כאילו עם כרטיס אחד עובד
עוד דבר חשוב
אני יכול להגדיר עם איזה כרטיס מסך אני רוצה לעבוד
ובדקתי את זה יש לי אפשרות לעבוד גם עם הכרטיס שעל הלוח sis 651
וגם עם הכרטיס ATI RAGE 128
אבל לא ביחד
אני מרגיש שאני ממש קרוב לפתרון אך חייב איזהשהי עזרה מצדכם
תודה מראש
Anonymous - 08/10/2006 - 02:00 נושא ההודעה:
צרף בבקשה את קובץ ה-xorg.conf המלא מיושר לשמאל (השתמש בתגית code)
taxi4u - 08/10/2006 - 05:19 נושא ההודעה:
קוד:
[a1@login ~]$ lspci | grep VGA
00:0e.0 VGA compatible controller: ATI Technologies I
00:13.0 VGA compatible controller: ATI Technologies I
01:00.0 VGA compatible controller: Silicon Integrated PCI/AGP VGA Display Adapter
Anonymous - 08/10/2006 - 07:06 נושא ההודעה:
taxi4u :
קוד:
[a1@login ~]$ lspci | grep VGA
00:0e.0 VGA compatible controller: ATI Technologies I
00:13.0 VGA compatible controller: ATI Technologies I
01:00.0 VGA compatible controller: Silicon Integrated PCI/AGP VGA Display Adapter